35
Before Using the Terminal
Battery Care is a function that learns your
charging habit (time zone for connecting to
charging equipment long) to adjust charging
speed and keep battery performance better
so as to extend battery life.
■
Starting "Battery Care" function
It predicts the time when charging
equipment will be disconnected by learned
charging habit and adjusts charging speed
so that the battery become fully charged at
the time.
After start of charging with Battery Care,
charging pauses once short of full charge.
And then charging resumes near estimated
full charge time to be on time for full charge
■
Switching normal charging
・
From the Home screen,
u
[Settings]
u
[Battery]
u
[Battery Care]
u
Tap
to
turn
off Battery Care.
・
To stop Battery Care charging to switch to
normal charging, drag the status bar
down
u
Tap [Charging with Battery Care].
❖
Note
・
It may take 7 days or more to complete learning your
habit.
・
If regularity in your charging habit cannot be found,
Battery Care does not start because incomplete of
the learning and normal charging will be performed.
・
If you remove charging equipment during Battery
Care charging, the terminal may not be fully charged.
To charge the battery using the Desktop
Holder SO27 (optional) and AC Adapter 06
(optional), operate the following steps.
・
Depending on the thickness of the terminal,
please install the attachment that was
included with the desktop holder before
charging. Placing the terminal on the desktop
holder without the attachment on it may
damage the USB Type-C jack or other parts.
・
When you do not attach a commercially
available case or cover to the terminal, attach
the Attachment 60A (P.36) to the desktop
holder to use.
1
Insert a Type-C plug of the AC
adapter into the charging jack on
the back of the desktop holder.
Saving battery life (Battery
Care)
Charging with desktop holder
Desktop
holder
Charging
jack
T
ype
-
C
plug
Содержание SO-02J
Страница 1: ...16 9 INSTRUCTION MANUAL ...