Ad
minis
tra
ting t
he Camer
a
Setting the Sensor input/Camera tampering detection/Motion detection — Action input Menu
53
Setting the Sensor input/
Camera tampering
detection/Motion
detection
— Action input Menu
When you click
in the Administrator menu,
the Action input Menu appears.
The Action input Menu consists of the following tabs:
SNC-VB635/VB630/VB600/VB600B/VB632D/
VM630/VM600/VM600B/VM631/VM601/
VM601B/VM632R/VM602R/XM631:
Event
condition,
Sensor input,
Camera tampering
detection,
Motion detection,
Face detection
and
Network disconnection.
SNC-EB630/EB630B/EB600/EB600B/EB632R/
EB602R/EM630/EM600/EM631/EM601/
EM632R/EM602R:
Event condition,
Camera
tampering detection,
Motion detection
and
Face
detection.
SNC-XM637/XM636/XM632/CX600W/CX600:
Event condition, Camera tampering detection,
Motion detection, Face detection
and
Network
disconnection.
When the Motion detection or Face
detection tab is displayed for the first
time
When you click
Motion detection
or
Face detection
,
“Security Warning” is displayed. When you click
Yes
,
ActiveX control is installed and the Motion detection or
Face detection tab is displayed.
Notes
• If
Automatic configuration
is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration
and set the proxy server
manually. For the setting of the proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
Event condition Tab
Create event execute conditions for each action.
Event condition 1, 2, 3, 4, 5
Select the event condition.
You can combine the alarm using the following event
execute conditions.
and:
detect when both conditions happen within a
specified interval regardless of the sequence.
or:
detect when either condition happens.
then:
detect when each of the conditions happen within
a specified interval in sequence.
If you set the event condition to
None
, the following
alarm 1, 2, 3 menus appear.
1, 2, 3
Select the alarm.
Selectable alarms are as follows.
Displayed items vary depending on the function.
Sensor input 1:
The external sensor that is connected to
sensor input 1 of the camera I/O port.
Sensor input 2:
The external sensor that is connected to
sensor input 2 of the camera I/O port.
Presence sensor:
The alarm is triggered by the presence
sensor function.
Camera tampering detection:
The alarm is triggered if
the camera detects tampering, such as direction
shifting or spray.
Motion detection:
The alarm is triggered by the motion
detection function.
VMF:
The alarm is triggered by the VMF function.
Face detection:
The alarm is triggered by the face
detection function.
Network disconnection:
The alarm is triggered by
disconnection to a specific IP address.
Action input