Sony SNC-VB600B, Руководство пользователя

Страница: 20 / 39

Ad
minis
tra
ting t
he Camer
a
Setting the Camera Image and Audio — Video / Audio Menu
20
“fps” is a unit indicating the number of frames
transmitted per second.
The frame rate of JPEG image can be changed by the
setting of
Image quality .
Bit rate
Set the bit rate of H.264 image transmission for a line.
When the bit rate is set to a high level, better image
quality can be enjoyed.
I-picture interval
Set the I-picture insertion interval in seconds.
H.264 profile
Set the H.264 profile setting.
CBR
Selectable bit rates are CBR and VBR. Select CBR if
you want to compress an image by constant bit rate.
Select VBR if you want to maintain image quality.
When you select the CBR checkbox, CBR will be
applied. When the CBR checkbox is not selected, VBR
will be applied.
Image quality
Set the JPEG image quality.
Selectable values are from
1 to 10 .
When 10 is selected, the best image quality is achieved.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth. This
function is not available when the setting is set to
0 .
OK/Cancel
See “Buttons common to every menu” on page 14.
Audio Tab
Audio sending
Make settings for sending audio from the m
microphone input connector.
Enable
Select the checkbox if you want to send audio from the
network camera.
Note
When you change the Audio setting, click Refresh on
the Web browser to reflect the change on the opening
main viewer page.
Audio in
Select microphone input or line input.
Mic volume
When the Audio in is set to microphone input, set the
volume level of the audio input from the
m microphone
input connector. It is adjustable from –10 to +10 .
Audio Codec
Select the codec type of audio from the
m
microphone
input connector. The bit rate may differ, depending on
the codec type.
Note
No audio is output if the Plug-in free viewer is used.
OK/Cancel
See “Buttons common to every menu” on page 14.
Day/Night Tab
Use this tab to set the day/night function of the camera.
Preview screen
This screen is for monitoring images and configuring
day/night settings.
Day/Night
Mode
Select the day/night mode. This function has the
following modes.
Auto : Normally works in day mode; switches
automatically to night mode in a dark place.
Manual : Switch the day/night mode manually.
When you select Manual and the checkbox of the night
mode is selected, the camera works in night mode.
Otherwise, the camera works in day mode.
Sensor input: Controls the day/night mode by
synchronizing it with the sensor input.
Select the synchronized sensor from
Sensor input 1 and
Sensor input 2 . While a sensor input is detected, the
camera works in night mode.
Threshold
This mode is available when Auto is selected.
Set the brightness level when the night mode is set.
Hold time
This mode is available when Auto is selected.