Sony SNC-EMX30, Руководство пользователя

Страница: 77 / 275

78 en | Configuration Network camera
2019-07 | V01 | DOC User manual Sony Corporation
– The medium is added as a target in the Managed storage media list.
– Newly added media is shown as Not active in the Status column.
2. Click Set to activate all media in the Managed storage media list.
– The Status column shows all media as Online .
3. Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be
recorded on the target selected.
Formatting storage media
All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
Click a storage medium in the Managed storage media list to select it.
2. Click Edit below the list.
3. Click Format in the new window to delete all recordings in the storage medium.
4. Click OK to close the window.
Deactivating storage media
A storage medium in the Managed storage media list can be deactivated. It is then no longer
used for recordings.
1.
Click a storage medium in the Managed storage media list to select it.
2. Click Remove below the list. The storage medium is deactivated and removed from the
list.
Click Set to apply the changes.
4.4.2 Recording Profiles
A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the
Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile click its tab to open its settings page.
–
To copy the currently visible settings to other profiles, click Copy Settings . A window
opens to select the target profiles for the copied settings.
– If you change a profile’s settings, click Set to save.
– If necessary, click Default to return all settings to their factory defaults.
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This
selection is independent of the selection for live stream transmission. (The properties of the
encoder profiles are defined on the
Encoder Profile page.)
Select the ROI pre-position scene that is to be used for recording. (The ROI pre-positions for
stream 2 are configured on the
Live page.)
Settings for selected recordings
Recording includes
Select what is to be included in the recordings:
–
Audio : If audio is not enabled, Off is shown. Click on Off and the page is redirected to
the Audio section.
– Metadata .
Standard recording
Select the mode for standard recordings: