Sony SNC-EMX30, Руководство пользователя

Страница: 76 / 275

Network camera Configuration | en 77
Sony Corporation User manual 2019-07 | V01 | DOC
Input volume
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Recording format
Select a format for audio recording. The default value is AAC 48 kbps . You can select AAC 80
kbps , G.711 or L16 depending on the required audio quality or sampling rate.
AAC audio technology is licensed by Fraunhofer IIS.
(http://www.iis.fraunhofer.de/amm/)
Click
Set to apply the changes.
4.3.14 Pixel Counter
The number of horizontal and vertical pixels covered by the highlighted area is displayed
below the picture. With these values you can check whether the requirements for specific
functions, for example, identification tasks, are fulfilled.
1.
Click Freeze to freeze the camera image if the object that you want to measure is moving.
2. To reposition a zone, place the cursor over the zone, hold down the mouse button and
drag into position.
3. To change the shape of a zone, place the cursor over the edge of the zone, hold down the
mouse button and drag the edge of the zone to the required position.
4.4 Recording
For devices with an SD slot, images can be locally recorded to an SD card.
SD cards are the ideal solution for shorter storage times and temporary recordings. They can
be used for local alarm recording or to improve the overall reliability of video recording.
Two recording tracks are available ( Recording 1 and Recording 2 ). The encoder streams and
profiles can be selected for each of these tracks for both standard and alarm recordings.
Ten recording profiles are available where these recording tracks can be defined differently.
These profiles are then used for building schedules.
4.4.1 Storage Management
Device manager
The Device manager indicates if storage is locally controlled.
Recording media
Select a media tab to connect to the available storage media.
Local Media
An SD card inserted in the camera can be used for local recording (not available on some
cameras).
4
If the SD card is password protected, enter the password into the Password field.
The Storage overview field displays the local media.
Note: SD card recording performance is highly dependent on the speed (class) and
performance of the SD card. It is recommended to use an industrial SD card with health
monitoring.
Activating and configuring storage media
Available media must be transferred to the Managed storage media list, activated, and
configured for storage.
1. In the Storage overview section, double-click a storage medium.