58
en | Configuration
Network camera
2019-07 | V01 | DOC
User manual
Sony Corporation
4
Configuration
4.1
General
4.1.1
Identification
Device name
Assign a unique name to assist in identification. This name simplifies the management of
multiple devices in more extensive systems.
The name is used for remote identification, for example, in the event of an alarm. Choose a
name that makes it as easy as possible to identify the location unambiguously.
Device ID
Each device should be assigned a unique identifier that can be entered here as an additional
means of identification.
Each video channel can be given a name. Click the + sign to add an extra line.
Click
Set
to apply the changes.
4.1.2
User Management
A password prevents unauthorized access to the device. You can use different authorization
levels to limit access.
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. Therefore, you must always start from the highest authorization
level when assigning passwords.
You can define and change a password for each authorization level if you are logged into the
“service” user account.
Authentication modes
The section
Authentication modes
provides information about the authentication modes set
in the camera. A checkmark appears in the checkbox to the left of the mode if the mode is set.
If the mode is not set, the phrase “No certificate installed” appears to the right of the mode
name.
This device has three authentication modes:
–
Password
indicates a password is set for the camera. It prevents unauthorized access to
the device, and can use different authorization levels to limit access.
Proper password protection is only guaranteed when all higher authorization levels are
also protected with a password. Therefore, you must always start from the highest
authorization level when assigning passwords.
You can define and change a password for each authorization level if you are logged into
the service user account.
–
Certificate
. A check mark in this check box indicates that at least one certificate is loaded
onto the device.
–
Active Directory server (AD FS)
. A check mark in this check box indicates that the device
uses an active directory server.
Creating a new user
To create a new user, click
Add
in the section below
Authentication modes
.
In the box
User
, fill in the fields:
1.
User name: Enter a name with a minimum of 5 and a maximum of 31 characters.
2.
Group
, select the appropriate authorization level:
–
live is the lowest authorization level. At this level, it is only possible to view the live
video image, and switch between the different live image displays.
Содержание SNC-EMX30
Страница 274: ......
Страница 275: ... Bosch Security Systems B V 2019 2019 07 V01 ...