67
Synchronized Recording (not available on SLV-SE610B)
Ad
d
itiona
l O
p
e
ra
tions
Recording programmes using the Synchronized Recording function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the
total recording time.
• Set
DECODEUR/LIGNE3*
1
(or
DECODEUR/LIGNE2*
2
) to
LIGNE3*
1
or (LIGNE2*
2
)
in the
OPTIONS-2 menu (see page 84).
• Refer to “Index to parts and controls” for
button locations.
To cancel the Synchronized Recording function
Press ENR SYNCHRO. The SYNCHRO indicator disappears.
To stop recording
Press
x
STOP while recording.
Notes
• This function may not work with some types of satellite tuners.
• Some TVs or other equipment with timer functions will automatically turn off if no
operation is performed within a certain amount of time. In this case, the
Synchronized Recording also stops automatically.
• When the connected equipment turns on while the SYNCHRO indicator is
appeared, recording starts automatically.
• If the settings for timer recording and Synchronized Recording overlap, the
programme that starts first has priority and the second programme starts recording
only after the first programme has finished.
• The Auto Clock Set function does not work while the VCR stands by for
Synchronized Recording.
*
1
SLV-SE810B only
*
2
SLV-SE710B, and SX710B only
1
Press CHOIX ENTREE or /– to display “L3*
1
(or L2*
2
)” in
the display window.
2
Set the timer on the connected equipment to the time of the programme
you want to record, then turn it off.
3
Press SP/LP to select the tape speed.
4
Hold down ENR SYNCHRO for more than two seconds.
The SYNCHRO indicator lights up and the VCR stands by for recording.
The VCR automatically turns on and starts recording when it receives an
input signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or
when the connected equipment stops transmitting an input signal.
ENR SYNCHRO