Sony SLV-SE600A Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 96

background image

2

WARNING

WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.

Mains lead must only be changed at a qualified
service shop.

Precautions

Safety

• This unit operates on 220 – 240 V AC, 50 Hz.

Check that the unit’s operating voltage is
identical with your local power supply.

• If anything falls into the cabinet, unplug the unit

and have it checked by qualified personnel before
operating it any further.

• The unit is not disconnected from the mains as

long as it is connected to the mains, even if the
unit itself has been turned off.

• Unplug the unit from the wall outlet if you do not

intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never
by the cord.

Installing

• Allow adequate air circulation to prevent internal

heat buildup.

• Do not place the unit on surfaces (rugs, blankets,

etc.) or near materials (curtains, draperies) that
may block the ventilation slots.

• Do not install the unit near heat sources such as

radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.

• Do not install the unit in an inclined position. It is

designed to be operated in a horizontal position
only.

• Keep the unit and cassettes away from equipment

with strong magnets, such as microwave ovens or
large loudspeakers.

• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to a

warm location, moisture may condense inside the
VCR and cause damage to the video head and
tape. When you first install the unit, or when you
move it from a cold to a warm location, wait for
about three hours before operating the unit.

Caution

Television programmes, films, video tapes and other
materials may be copyrighted. Unauthorized
recording of such material may be contrary to the
provisions of the copyright laws. Also, use of this
recorder with cable television transmission may
require authorization from the cable television
transmitter and/or programme owner.

Compatible colour systems

This VCR is designed to record using the PAL (B/
G) colour system and play back using the PAL (B/
G) and NTSC 4.43 colour systems. Recording of
video sources based on other colour systems cannot
be guaranteed.

S

HOW

V

IEW

is a registered trademark of Gemstar

Development Corporation. The S

HOW

V

IEW

system

is manufactured under license from Gemstar
Development Corporation.

«
1
2
3
4
...
»

Содержание SLV-SE600A

































































































Отзывы:

Нет отзывов

Похожие инструкции для SLV-SE600A

Бренд: Philips Страницы: 1

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 16

Бренд: Philips Страницы: 20

Бренд: Memorex Страницы: 49

Бренд: RCA Страницы: 32

Бренд: RCA Страницы: 32

Бренд: RCA Страницы: 68

Бренд: Daewoo Страницы: 63

Бренд: Palsonic Страницы: 22

Бренд: Daewoo Страницы: 67

MC092EMG - 9' Tv/vcr Combination

Бренд: Magnavox Страницы: 43

Бренд: Panasonic Страницы: 76

Бренд: Magnavox Страницы: 9

Бренд: JVC Страницы: 16

Бренд: Panasonic Страницы: 72

Бренд: Pentax Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды