Sony SLV-SE410K Скачать руководство пользователя

Страница: 46 / 84

Recording TV programmes

Notes

• The

DISPLAY information does not appear during still (pause) mode or slow-

motion playback.

• The

DISPLAY information will not appear while playing an NTSC-recorded

tape.

• If a tape has portions recorded in both PAL (MESECAM) and NTSC systems, the

time counter reading will not be correct. This discrepancy is due to the difference
between the counting cycles of the two video systems.

• You cannot watch a Canal Plus programme while recording another Canal Plus

programme.

• When you insert a non-standard commercially available tape, the remaining time

may not be correct.

• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be

displayed.

• The station name* may not appear if the VCR does not receive station name

information signals.

* SLV-SE510K only

Recording what you are watching on the TV (TV Direct
Rec) (SLV-SE510K only)

If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).

Tips

• The TV indicator appears in the display window after you press

REC in some

situations such as:
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the

data in the VCR tuner preset.

• If there is a tape with its safety tab in place in the VCR, the VCR automatically

turns on and starts recording what you are watching on the TV when you press

REC.

• You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu

(see page 73).

Insert a tape with its safety tab in place.

Press

REC while you are watching a TV programme or external

source.

The VCR automatically turns on, then the TV indicator lights up and the
VCR starts recording what you are watching on the TV.

Содержание SLV-SE410K





















































































Результаты поиска

Содержание SLV-SE410K

Отзывы:

Похожие инструкции для SLV-SE410K

Бренды по названию

Популярные бренды

Sony SLV-SE410K, Руководство по эксплуатации

Результаты поиска

Содержание SLV-SE410K

Отзывы:

Похожие инструкции для SLV-SE410K

Бренды по названию

Популярные бренды