Sony SLV-D201P Operating Instructions (primary manual), Руководство по эксплуатации

Страница: 47 / 108

47
Audio Setup
D
V
D
Se
ttings
and
A
d
jus
tem
ents
Menu choices
• Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
• DTS (DVD only)
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
• Audio DRC (Dynamic Range Control) (DVD only)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC.” This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby
Digital” is set to “D-PCM”.
The default setting is indicated in bold print.
4
Press
V/v
to select the setup item from the displayed list:
“Dolby Digital,” “DTS,” or “Audio DRC.”
5
Press
B/b
to select an item, then press
O
RETURN to confirm the setting.
6
Press
O
RETURN repeatedly to exit the menu.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Off
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On
Select this when the player is connected to an audio component
with a built-in DTS decoder.
Standard Normally select this position.
TV Mode
Makes the low sounds clear even if you turn the volume down.
continued