Sony SIR-3032i, Инструкция по эксплуатации

Страница: 26 / 156

3-6
(E)
SIR-3400H / SIR-3032i / SIR-3032W
The enabled keys are changed in transport mode. (Yes: Enabled, No: Disabled)
Transport Setting keys
mode
INDEX/ID SPD/BCM SPEAKER RANGE OFFSET INPUT SEARCH MEMO OUT/TSG MRK1 MRK2 SHIFT
STOP No Yes Yes Yes Yes Yes Yes Yes Yes/No Yes Yes Yes
E-E No Yes Yes Yes Yes No No Yes Yes Yes Yes Yes
REC-PAUSE No Yes Yes Yes Yes No No Yes Yes Yes Yes Yes
REC Yes No Yes Yes Yes No No Yes Yes Yes Yes Yes
FWD No No Yes No No No No No Yes/No Yes Yes No
FF No No Yes No No No No No No No No No
REW No No Yes No No No No No No No No No
SEARCH No No No No No No No No No No No No
Setting Keys
The setting keys can be used to perform the following two operations.
. Function and operation settings
. Input of numbers and text (for recording notes only)
Key operation is described primary as function/operation keys.
Also, in this manual, the key names (such as INDEX/ID key) are used as function/operation setting keys
except in the description of note recording.
<Lamps>
The lamp above the key indicates the status below.
Blinking : The key is enabled.
Lit
: The key was pressed, and the setting can be made.
When there are two lamps, the key has the following two functions. (See “Setting Key Descriptions”.)
Left-side lamp
: When the key is pressed by itself
Right-side lamp : When the setting key is pressed after pressing the SHIFT key (except for the SHIFT key
right lamp)
<Setting Key Descriptions>
The functions of some setting keys change depending on if the key was pressed by itself or if the setting key
was pressed after pressing the SHIFT key.
The descriptions in this section use the expressions below to indicate how the key was pressed.
When the key is pressed by itself : No additional comment
When the setting key is pressed after the SHIFT key : in SHIFT mode
wg
wk
wh wj e;
wl
ea
ef eg es eh ed ek
ej
3. Names and Functions of Parts