Sony SHAKE-X3D, Руководство по эксплуатации

Страница: 42 / 64

42
GB
2
Adjust the volume on each
system.
3
Activate the Party Chain function
on the system which you want it
to be the Party Host.
Press FUNCTION, then turn the
VOLUME/MULTI CONTROL knob to
select the function you want (except
AUDIO IN 1 in connection

(page 41)), then press ENTER. Start
playback the music, then press
PARTY CHAIN.
“PARTY CHAIN” appears in the
display panel. The system starts the
party as Party Host and other
systems will become Party Guest
automatically. All systems play the
same music as the Party Host.

Depending on the total unit of systems
you have connected, Party Guest may
take some time to start playing the
music.

Changing the volume level and sound
effect on the Party Host will not affect
the output on the Party Guest.

The Party Guest continues playing the
music source as Party Host even when
you change the function on Party Guest.
However, you can adjust the volume
and change the sound effect on Party
Guest.

When you use the microphone on Party
Host, the sound will not be output from
Party Guest.

When one of the system in the
connection is performing USB transfer,
wait the system to complete or stop the
transfer before you activate the Party
Chain function.

For detailed operation on other systems,
refer to the operating instructions of the
systems.
To select a new Party Host
Repeat step 3 of “Enjoying the Party
Chain” on the system which you want it
to be a new Party Host.
The current Party Host will become
Party Guest automatically. All systems
play the same music as the new Party
Host.

You can only select another system as
the new Party Host after all the systems
have completed the Party Chain
function.

Repeat the step above if the selected
system does not change as a new Party
Host after a few seconds.
To deactivate the Party Chain
On the Party Host, press PARTY CHAIN.
Repeat the step above if the system does
not deactivate the Party Chain after a few
seconds.
Singing along: Karaoke
1
Turn MIC LEVEL on the unit to MIN
to reduce the microphone volume
level.
2
Connect an optional microphone
to MIC 1 or MIC 2 jack on the unit.
Connect another optional
microphone if you want to sing in
duet.
3
Start playing the music and adjust
the microphone volume. Press
MIC ECHO repeatedly to adjust the
echo effect.
4
Start singing along with the
music.

Karaoke Mode is turned on when the
microphones are connected during
DVD/CD, USB 1 or USB 2 function.
Notes
Notes
Note
Preparing for karaoke
Notes