Sony SHAKE-X3D, Руководство по эксплуатации

Страница: 40 / 64

40
GB
Creating your own
sound effect
You can raise or lower the levels of
specific frequency bands, then store
the setting in the memory as “CUSTOM
EQ”.
1
Press OPTIONS.
2
Press / repeatedly to select
“EQ EDIT”, then press .
3
Press / repeatedly to adjust
the equalizer level, then press .
4
Repeat step 3 to adjust the level of
other frequency bands and
surround effect.
To exit the options menu, press
OPTIONS.
To select the custom equalizer
setting
Press MUSIC repeatedly to select
“CUSTOM EQ”.
Creating a party
atmosphere
(DJ EFFECT)
Use the buttons on the unit to perform
this operation.
1
Press the following button to
select the effect type.

FLANGER: Creates a deep flanging
effect that is similar to the roar of
a jet plane.
 ISOLATOR: Isolates a specific
frequency band by adjusting the
other frequency bands. For
example, when you want to focus
on vocals.

SAMPLER: Provides a series of
special sound effects.
2
(For SAMPLER only)
Press SAMPLER repeatedly to
select SAMPLER mode.
3
(For SAMPLER only)
Press S1/S2/S3/S4 to output the
SAMPLER sound effect. To output
other SAMPLER sound effect
continuously, turn the VOLUME/
MULTI CONTROL knob.
(For FLANGER and ISOLATOR only)
Turn the VOLUME/MULTI
CONTROL knob to adjust the effect
level.
To turn off the effect
 Press DJ OFF.

Press the selected effect button
again (for FLANGER and ISOLATOR
only).

The DJ EFFECT is automatically turned off
when you:

turn off the system

change the function

change the tuner band

activate or deactivate the PARTY
CHAIN function

activate the Football mode

If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.

You cannot use VOLUME/MULTI
CONTROL on the unit to adjust the
volume when the DJ EFFECT is activated.
Press

+/– on the remote control to
adjust the volume.
Notes