Sony SHAKE-X3D, Руководство по эксплуатации

Страница: 19 / 64

19
GB
D
isc/USB Playback
Basic playback
1
Press FU/– repeatedly to
select “DVD/CD”, “USB 1”, or
“USB 2”.
You can also use the buttons on the
unit. Press FUNCTION, then turn the
VOLUME/MULTI CONTROL knob to
select “DVD/CD”, “USB 1”, or
“USB 2”, then press ENTER.
2
For DVD/CD function:
Press

on the unit to open the disc
tray and load a disc with the label
facing up.
Press

on the unit again to close
the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
For USB function:
Connect a USB device to the
(USB) 1 or (USB) 2 port.

You can use your iPhone/iPod with
this system via BLUETOOTH
connection only.

You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot
be plugged into the (USB) port.
3
( only)
Press MEDIA MODE repeatedly to
select the media ([MUSIC]/
[VIDEO]/[PHOTO]) you want.
4
Press

to start playback.
To select USB memory
You can select which memory to use as
a playback source or transfer
destination if the USB device has an
internal memory and a memory card.
Make sure to select a memory before
starting playback or transfer.
1
Press OPTIONS.
2
Press / repeatedly to select
“MEM SEL”, then press .
3
Press / repeatedly to select the
memory you want, then press .
To exit the options menu, press
OPTIONS.
Disc/USB Playback
When you
play back an
8 cm disc such
as a CD single,
place it on the
inner circle of
the tray
USB device
Notes
To Press
Stop playback

Pause playback

Resume
playback or
return to normal
playback

Cancel the
resume point

twice
Select a track,
file, chapter or
scene

or

during
playback.
Or, hold down SHIFT, then
press the numeric buttons,
and then press
.
(Operation might be
prohibited by disc or USB
device)