Sony SHAKE-X3D, Руководство по эксплуатации

Страница: 16 / 64

16
GB

AUDIO IN 2 L/R jacks
Connect to the audio output jacks of
a computer or gaming device. The
sound is output through this system.

VIDEO OUT jack
Use a video cord to connect to the
video input jack of a TV or projector.
Do not connect this unit to the TV through
the video deck.

Speakers

LED SPEAKER terminals
Connect the LED SPEAKER connector
of the speaker to this terminal.
The lighting on the speakers will
react according to the music source.
You can select the speaker
illumination according to your
preference (page 43).

LEFT SPEAKER and RIGHT
SPEAKER terminals
(SHAKE-X7D only)

SPEAKERS terminals
(SHAKE-X3D only)
Example:

Be sure to use only the supplied
speakers.

When connecting speaker cords, insert
the connector straight into the
terminals.

Power
Connect the AC power cord (mains
lead) (supplied) to the unit, then plug it
into a wall outlet.
A several space is left between the
plug and the rear panel even when the
power cord (mains lead) is inserted
firmly. The cord is supposed be
connected this way. This is not a
malfunction.

If the AC plug of your unit does not fit
into the wall outlet, attach the supplied
AC plug adaptor (only for models
supplied with the AC plug adaptor).

The demonstration appears in the
display panel. Press

to turn on the
system and the demonstration
automatically ends.
Insert the two supplied R03 (size AAA)
batteries by matching the polarities as
shown below.
Note
Notes
Notes
Inserting batteries
AC power cord (mains
lead) (supplied)
To the wall
outlet