Sony SGPT13 Series, Руководство пользователя

Страница: 110 / 190

Remote control
The Remote control app enables you to use your tablet device as a remote control by registering it as the remote
control of various AV devices.
You can use the “gesture” remote control feature operated by gestures such as flicking or sliding as well as the
“full” remote control feature operated by tapping.
1. Tap to start the Remote control app.
Hint
If you cannot find the icon to start the app, look for it in the application launcher displayed by tapping [
Apps & Widgets] at the top right of the Home screen.
Registering the remote control by setting the category and manufacturer of the device
The remote control is usually registered as follows.
1. Start the Remote control app.
2. Tap [ Register device] or [Register device].
3. Tap [Easy registration].
4. Register your tablet device as a remote control following the on-screen instructions.
Execute [Remote control test] if needed.
When you finished setting, the device list screen is displayed. Your tablet device can then be used as the
remote.
Hint
If you cannot find the category or manufacturer, allow your tablet device to learn the remote control signal
then register it.
Two or more devices may be displayed depending on the category or manufacturer. In this case, test the
remote control operation with every “Type” displayed and select the one that works correctly.
To register as a remote control for another device
Tap [ Register device] on the device list screen.
Learning the remote control signal and registering it
If you cannot find the category or manufacturer of the device at [Easy registration], register the remote control as
follows.
1. Start Remote control app.
2. Tap [ Register device] or [Register device].
3. Tap [Learn from a remote control].