5-32
SEL1635GM
(6) Rom Check
• Check the switch operation.
• Check the data stored in the EEPROM on the Main Board.
Subject
Not required
Operation on Lens side
• Focus hold button
• Focus mode switch
Type of the camera
ILCE-5000
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Click the [Rom Check] button in the Adjustment and Inspection.
2. The message screen is displayed in the following order. Operate
the focus hold button accordance with the message.
Focus hold button
3. The message screen is displayed in the following order. Operate
the focus mode switch accordance with the message.
Focus mode switch
– Continued on next page –
15. When the ENTER key is pressed, message screen is displayed in
the following. Set the flange back adjustment jig on the subject.
16. When the ENTER key is pressed, automatic adjustment is started.
17. After the automatic adjustment is completed, message screen
is displayed in the following. Set the siemens star chart on the
subject.
18. When the ENTER key is pressed, automatic adjustment is started.
19. After the automatic adjustment is completed, the calculation
processing of the quantity of correction is started. The display
of the message screen changes as follows.
(Processing time: 10 to 15 minutes)
20. “FSA1 ADJUSTMENT OK” is displayed, press the ENTER key.
21. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and “FINISHED” is displayed when the process is completed,
then click the [OK] button.
