Sony SDX-900V Series, Руководство пользователя

Страница: 12 / 32

12
DR (Disaster Recovery * ) Mode
To enable DR Mode, set position 1 [Drive Mode] switch to ON.
ON
OFF
1 2 3 4 5 6 7 8
*
In Disaster Recovery Mode, an SDX-900V series drive enters the DR
Standby Mode 15 seconds after you insert a write-protected tape into the
drive, and all the drive LED blink. If you restart the drive while the LED
are blinking, it starts as a CD-ROM device.
For details about the Disaster Recovery Mode, refer to the instruction
manual that came with the application software you are using.
Emulation Mode *
To enable Emulation Mode, set the position 2 [Drive Mode] switch to ON.
ON
OFF
1 2 3 4 5 6 7 8
*
Emulation Mode returns the following in the Product Identification field
of Inquiry of a SDX-900V series drive.
SDX-700C
Data Compression Control DIP switch
Data compression can be selected by DIP switches. Data compression is
enabled while position 7 [DC Control (1)] is ON. Control by host can be
disabled when position 8 [DC Control (2)] is ON.
1 DR (Disaster Recovery) Mode (ON)
2 Emulation Mode
3 AIT Library Interface Mode
4 Reserved
5 Terminator Power
6 Periodic Cleaning Req
7 DC Control (1)
8 DC Control (2)
1 DR (Disaster Recovery) Mode
2 Emulation Mode (ON)
3 AIT Library Interface Mode
4 Reserved
5 Terminator Power
6 Periodic Cleaning Req
7 DC Control (1)
8 DC Control (2)