SERVICE MANUAL
Sony Corporation
Audio Business Group
Published by Sony Techno Create Corporation
SA-WCT100/SS-MCT100
SPECIFICATIONS
SA-WCT100
ACTIVE SUBWOOFER
SS-MCT100
SPEAKER SYSTEM
9-887-974-01
2008B05-1
©
2008.02
US Model
Canadian Model
Ver. 1.0 2008.02
• SA-WCT100 is the amplifi er, HDMI and active sub-
woofer section in HT-CT100.
• SS-MCT100 is the satellite speaker in HT-CT100.
• Repair in the state of having connected with SA-
WCT100 and SS-MCT100.
This system incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent
6,487,535 & other U.S. and worldwide patents #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; issued & pending. DTS and DTS Digital
Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
This system incorporates High-Definition Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
“BRAVIA” is a trademark of Sony Corporation.
Photo: SA-WCT100
Photo: SS-MCT100
Formats supported by this
system
Digital input formats supported by this system
are as follows.
* Linear PCM accepts sampling frequencies of no
more than 48 kHz.
AUDIO POWER SPECIFICATIONS
(SA-WCT100)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION (Stereo mode):
With 8 ohms loads, both channels driven, from 180 -
20,000 Hz; rated 40 Watts per channel minimum RMS
power, with no more than 1 % total harmonic distortion
from 250 milli Watts to rated output.
Amplifier section (SA-WCT100)
Reference Output Power
Surround mode
Front: 50 Watts/ch
(8 ohms at 1 kHz,
THD 10 %)
Center*: 50 Watts/ch
(8 ohms at 1 kHz, THD
10 %)
Subwoofer: 100 Watts/ch
(4 ohms at 100 Hz,
THD 10 %)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV
Impedance: 30 kohms
Inputs (Digital)
TV, DVD
Optical
SAT
Coaxial, optical
HDMI section (SA-WCT100)
Connector
HDMI 19pin-standard
connector
Video inputs/outputs
BD, DVD, SAT:
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz
(pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/
60 Hz
1920 × [email protected]/
60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz
(pixel sent 2 times)
Format
Supported/Not supported
Dolby Digital
B
DTS
B
Linear PCM (2ch)*
B
Linear PCM (5.1ch,
7.1ch)* (Only on
HDMI)
B
Dolby Digital Plus
×
Dolby True HD
×
DTS-HD
×
– Continued on next page –