1
Ver 1.1 2003. 04
SERVICE MANUAL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
SA-VE345
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads, from 20 – 200 Hz; rated
120 watts per channel minimum RMS power,
with no more than 0.8% total harmonic
distortion from 250 milliwatts to rated
output.
SS-V345
(front and surround speakers)
Speaker system
Full range, magnetically
shielded
Speaker units
5.5
×
11 cm
(2
1/4
×
4
3/8
in.), cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power: 110 watts
Sensitivity level
85 dB (1 W, 1 m)
Frequency range
120 Hz – 20,000 Hz
Dimensions (w/h/d)
Approx. 85
×
152
×
112
mm (3
3/8
×
6
×
4
1/2
in.),
including front grille
Mass
Approx. 850 g
(1 lb 14 oz) each
SPECIFICATIONS
SS-CN345
(center speaker)
Speaker system
Full range, magnetically
shielded
Speaker units
5.5
×
11 cm
(2
1/4
×
4
3/8
in.), cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power: 110 watts
Sensitivity level
85 dB (1 W, 1 m)
Frequency range
90 Hz – 20,000 Hz
Dimensions (w/h/d)
Approx. 300
×
81
×
122
mm (11
7/8
×
3
1/4
×
4
7/8
in.),
including front grille
Mass
Approx. 1100 g (2 lb 7 oz)
SA-WMS345
(subwoofer)
Speaker system
Active subwoofer,
magnetically shielded
Speaker unit
Woofer: 20 cm (8 in.),
cone type
Enclosure type
Advanced SAW type
Reproduction frequency range
26 Hz – 200 Hz
Amplifier section
Continuous RMS power output
120 W (US, CND model)
110 W (AEP, UK, AUS,
SP, MY model)
(8 ohms, 20 Hz – 20 kHz,
0.8% THD)
• SA-VE345 consists of the following models respectively.
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-877-088-02
2003D0400-1
© 2003. 04
MICRO SATELLITE SYSTEM
SA-VE345/WMS345/
SS-CN345/V345
Active Subwoofer
SA-WMS345
Front and Surround Speakers
SS-V345
Center Speaker
SS-CN345
SA-WMS345
Inputs
LINE IN (input pin jack)
SPEAKER IN (input terminals) (US, CND model only)
Outputs
(US, CND model only)
SPEAKER OUT (output terminals)
General
Power requirements
US, CND model:
120 V AC, 60 Hz
AEP, UK model:
220 – 230 V AC, 50/60 Hz
AUS model:
220 – 240 V AC, 50/60 Hz
SP, MY model:
110 – 120/220 – 240 V AC,
50/60 Hz
Power consumptions
90 W
1 W (standby mode)
Dimensions (w/h/d)
Approx. 230
×
392
×
464
mm (9
1/8
×
15
1/2
×
18
3/8
in.),
(US, CND model)
Approx. 230
×
392
×
447
mm (AEP, UK, AUS, SP,
MY model)
including front grille
Mass
Approx. 13.2 kg (29 lb 2 oz)
SS-CN345
SS-V345
– Continued on next page –
Содержание SA-VE345
Страница 15: ...15 SA VE345 WMS345 SS CN345 V345 MEMO ...