AEP Model
UK Model
E Model
Australian Model
Chinese Model
SERVICE MANUAL
SPEAKER SYSTEM
SPECIFICATIONS
• The SA-VE215 system consists of one unit
of SA-WMS215 and five units of SS-MS215.
• This set is the Speaker section in HT-K170/
K215.
SA-VE215/WMS215/
SS-MS215
Photo: SA-WMS215
Photo: SS-MS215
SS-MS215 Front, center and rear speakers
Speaker system
Full range, magnetically
shielded
Speaker units
5 cm cone type
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling
60 watts
capacity
(Maximum input
power)
Sensitivity level
84 dB (1W, 1m)
Frequency range
150 Hz - 20,000 Hz
Dimensions (w/h/d)
Approx. 76
×
100
×
86 mm
including front grille
Mass
Approx. 425 g
SA-WMS215 Subwoofer
System
Active subwoofer,
Speaker system
magnetically shielded
Speaker unit
Woofer : 16 cm cone type
Enclosure type
Acoustically Loaded Bass Reflex
Continuous RMS
50 W
power output
(8 ohms, 20 - 250 Hz)
Reproduction
32 Hz - 250 Hz
frequency range
High frequency
250 Hz
cut-off frequency
Input
LINE IN (input pin jack)
General
Power requirements
220 - 230 V AC, 50/60 Hz
Power consumptions
45 W
Dimensions (w/h/d)
Approx. 240
×
285
×
355 mm
including front panel
Mass
Approx. 8 kg
Design and specifications are subject to change without
notice
Ver 1.1 2003. 05
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-929-500-12
2003E16-1
© 2003.05
