15
GB
To use a cellular phone, connect it with this unit. For
details, see “Preparing a BLUETOOTH Device”
(page 9). Only while the “SongPal” connection is
established, [BT Phone] becomes available when
selecting the source.
Use the controls on the unit to perform the
following.
Receiving a Call
1
Press any button when a call is received
with a ringtone.
The phone call starts.
Note
The ringtone and talker’s voice are output only from the
audio device connected to FRONT AUDIO OUT.
To reject the call
Press and hold the following button:
any button other than SRC for 2 seconds.
SRC for 1 to 2 seconds.
To end the call
Press SRC.
Making a Call
You can make a call via “SongPal” only. For details,
see “SongPal with iPhone/Android smartphone”
(page 16).
Available Operations during
Call
To adjust the ringtone volume
Rotate the volume dial while receiving a call.
To adjust the talker’s voice volume
Rotate the volume dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
Press
during a call.
Adjustable volume levels: [MIC High], [MIC Low],
[MIC Middle].
To reduce echo and noise (Echo Canceler/
Noise Canceler Mode)
Press
during a call.
Settable mode: [ECNC 1], [ECNC 2].
To switch between hands-free mode and
handheld mode
During a call, press
to switch the phone call
audio between the unit and cellular phone.
Note
Depending on the cellular phone, this operation may
not be available.
Handsfree Calling (via BLUETOOTH
only)
