Sony RMU-01, Руководство по эксплуатации

Страница: 19 / 26

19 Connecting to Power Supply and Other Devices
Connecting to
Power Supply and
Other Devices
• For connections, use a category 5 or
superior LAN cable.
• Use a LAN cable with a maximum length
of 100 m (330 ft) for connecting the
devices (PoE hub, receivers, etc.).
• When the PoE power supply unit that
does not have the repeater function is
connected between this unit and the
DWR-R01D or the hub, keep the total
cable length at 100 m (330 ft) or shorter.
• Using self-made LAN cables may result
in network connection failure. Use
commercially available LAN cables,
instead.
Connections and the type of LAN cables
depend on the power supply method to this
unit.
Supplying Power From the
PoE Device
The examples of connections when the
power is supplied from the PoE device to
this unit are shown below.
To supply power from the PoE
hub
To supply power from the PoE
power supply unit
• When only one receiver (such as the
DWR-R01D) or the PC is connected to
this unit and the power is supplied to this
unit from the PoE power supply unit
• When multiple devices including this
unit and the receivers are connected and
the power is supplied to this unit from the
PoE power supply unit
Notes
RMU-01
PC
DWR-R01D
1) Straight cable
PoE
hub
RMU-01
PoE power
supply unit
DWR-R01D
1) Cross cable
2) Straight cable