Sony RHT-G2000 - Home Theater Built-in Sound Rack System, Руководство по эксплуатации

Страница: 16 / 36

16
US
If picture and sound are not synchronized, you can adjust the
delay between picture and sound.
1
Press AMP MENU.
2
Press x / X repeatedly until “CUSTOMIZE” appears,
then press ENTER or c .
3
Press X / x repeatedly until “A/V SYNC” appears,
then press ENTER or c .
4
Press
X
/
x
to select the setting.
• SYNC OFF: does not adjust.
• SYNC ON: adjusts the difference between picture and
sound.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
• Depending on the input stream, this function may not be effective.
The brightness of the front panel display can be set to one of
2 levels.
1
Press AMP MENU.
2
Press x / X repeatedly until “CUSTOMIZE” appears,
then press ENTER or c .
3
Press X / x repeatedly until “DIMMER” appears,
then press ENTER or c .
4
Press
X
/
x
to select the brightness of the front
panel display.
• DIMMER OFF: bright lighting.
• DIMMER ON: low lighting. Turns off the lighting
when the power is off.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
Adjusting the Delay Between the
Picture and Sound
(A/V SYNC)
Note
H X
M m . >
-
ENTER CLEAR
x
O
AMP MENU
X/x/c
ENTER
Changing the Brightness of the
Front Panel Display
(DIMMER)
H X
M m . >
-
ENTER CLEAR
x
O
AMP MENU
X/x/c
ENTER