119
Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
After the programme positions have been set,
you can change the order of each programme
position in the display list.
1
Select “Channel Swapping” in “Analog
Tuner,” and press ENTER.
2
Select “Next Screen,” and press ENTER.
3
Press
M
/
m
to select the programme
position number you want to swap, and
press
,
.
• To display other pages, press
.
/
>
repeatedly.
4
Press
M
/
m
to select the programme
position number to swap for the one
selected in step 3, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 3.
Setting up your recorder involves
coordinating the TV programme position (the
number you turn to on your TV or recorder to
watch a programme) with the guide channel
(the number that’s assigned to that channel in
your TV programme guide).
To find the guide channel numbers, look at
the “Channel Line-up Chart” in the
programme guide for your area that features
G-Code numbers.
Use the Channel Line-up Chart to coordinate
the guide channel number with the TV
programme position.
1
Select “G-Code CH Setting” in “Analog
Tuner,” and press ENTER.
2
Select “Next Screen,” and press ENTER.
3
Select the guide channel number
assigned in the programme guide using
M
/
m
.
To go to the previous/next page, press
.
/
>
.
4
Select “Preset” (the TV channel number
or station name) using
<
/
,
.
5
Repeat steps 3 and 4 for each guide
channel number that does not match the
TV channel number.
Channel Swapping
G-Code CH Setting
