C:\2886042111HXD860CEK\01GB-
HXD860CEK\040BAS.fm
master page=left
specdef 20060621
RDR-HXD860
2-886-042-
11
(1)
16
Step 3: Connecting the Audio Cords
Select one of the following patterns,
A
or
B
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to listen to sound.
* The yellow plug is used for video signals (page 13).
A
Digital audio input jack
If your AV amplifier (receiver) has a Dolby
*1
Digital, DTS
*2
, or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
B
Audio L/R (left/right) input jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for
sound.
VIDEO
AUDIO
INPUT
L
R
A
B
AV amplifier (receiver)
with a decoder
(white)
TV, projector, or AV
amplifier (receiver)
Audio/video cord
(not supplied)
: Signal flow
Coaxial digital cord (not supplied)
to DIGITAL OUT (COAXIAL)
to LINE 2 OUT (R-AUDIO-L)
Rear (L)
DVD recorder
(red)
(yellow)
*
(yellow)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial/HDMI digital input
Rear (R)
Front (R)
Subwoofer
Centre
HDMI cord
(not supplied)
to HDMI OUT
or