89
T
ime
r R
e
co
rd
in
g
(
F
o
r s
a
te
ll
ite
, c
a
b
le
, t
e
rr
e
st
ria
l
u
se
rs
o
n
ly
)
Recording from
Connected Equipment
You can set the recorder to automatically
record programmes from connected
equipment that has a timer function (such as
a satellite tuner). Connect the equipment to
the LINE 3/DECODER jack of the recorder
(page 30).
When the connected equipment turns on, the
recorder starts recording a programme from
the LINE 3/DECODER jack.
For details on operation, see page 67.
For details on bilingual recording, see
page 80.
b
Notes
• The Synchro Rec function does not work when
“Line3 Input” of “Scart Setting” is set to
“Decoder” in the “Video” setup (page 142).
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function
(page 134) does not work.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
Device” on page 30. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
For details about operation, see page 68.
For details about bilingual recording, see
page 80.
Recording from connected
equipment with a timer
(Synchro Rec)
Recording from connected
equipment without a timer
+
RW
-RW
VR
-RW
Video
-R
VR
+
R
HDD
-R
Video
