150
Password
You can set or modify the password that
gives access to the “Parental Control” and
“Parental Lock” settings.
1
Select “Password” in “Others,” and press
ENTER.
• If you have not yet set a password, the
display for registering a new password
appears.
• When you have already registered a
password, the display for entering the
password appears.
If you wish to change your password,
first enter your current password using
the number buttons, then select “OK”
and press ENTER.
The display for registering a new
password appears.
2
Enter your new four-digit password
using the number buttons, then select
“OK” and press ENTER.
b
Note
If you forget your password, you will have to reset
it by selecting “Password” of “Factory Setup” in the
“Others” setup (page 150).
Registration Code
Displays the registration code of DivX video
files for this recorder.
For more information, go to http://
www.divx.com/vod on the Internet.
Factory Setup
Allows you to select the setup settings by
group, and return them to their default
settings. Note that all of your previous
settings will be lost.
1
Select “Factory Setup” in “Others,” and
press
,
or ENTER.
The display for selecting a group of
settings appears.
2
Select the group of settings you want to
return to default from “Basic,” “DTV
Settings,”* “Video,” “Audio,”
“Recording,” “DVD,” “Others,”
“Password,” and “All,” and press
,
or
ENTER.
* Digital Mode only
3
Select “Start,” and press ENTER.
The selected settings return to their
default settings.
4
Press ENTER when “Finish” appears.
b
Note
When you set “Factory Setup” to “All” in Digital
Mode, the recorder is switched to Analogue Mode.
Format
You can erase all titles recorded on the HDD.
