42
The recorder can receive and record stereo/
SAP programs.
Recording stereo programs
If there is noise in the stereo program, set
“Auto Stereo” in the “Audio” setup to “Off”
(page 85). The sound will be recorded in
monaural but with less noise.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is
received, the “SAP” indicator lights up on the
front panel display. To record only SAP
sound, set “Tuner Audio” in the “Audio”
setup to “SAP” (page 85).
Pictures with copy protection cannot be
recorded on this recorder.
When the recorder receives a copy guard
signal, the recorder continues to record but
only a blank, grey colored screen will be
recorded.
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
Timer Recording
(Standard/VCR Plus+)
You can set the timer for a total of 40
programs, up to 30 days in advance.
There are two methods to set the timer: the
standard method and VCR Plus+ method.
• Standard: Set the date, time, and channel of
the program manually.
• VCR Plus+: Enter the PlusCode
programming number designated for each
TV program (page 44).
b
Note
Do not operate your cable box or satellite receiver
just before or during a timer recording. This may
prevent the accurate recording of a program.
Recording a stereo/SAP
program
Unrecordable pictures
Copy control
signals
Recordable discs
Copy-Free
Copy-Once
(CPRM*)
(CPRM*)
Copy-Never
None (a blank screen is
recorded)
+
RW
-RW
VR
-RW
Video
-R
Video
+
R
HDD
-R
VR
HDD
-RW
VR
-R
VR
Setting the timer manually
(Standard)
+
RW
-RW
VR
-RW
Video
-R
VR
+
R
HDD
-R
Video
<
/
M
/
m
/
,
,
ENTER
TIMER
x
REC
STOP
OPTIONS
