20
Step 4: Connecting the Audio Cords
Select one of the following patterns
A
or
B
, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver). This will enable you to listen to sound.
A
Connecting to audio L/R (left/right) input jacks
This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. You can
enjoy the following surround effects (page 61).
• TV: Dynamic, Wide, Night
• Stereo amplifier (receiver): Standard, Night
B
Connecting to a digital audio input jack
If your AV amplifier (receiver) has a Dolby
*1
Digital or DTS
*2
decoder and a digital input jack, use this
connection. You can enjoy Dolby Digital (5.1ch) and DTS (5.1ch) surround effects.
* The yellow plug is used for video signals (page 18).
VIDEO
AUDIO
INPUT
L
R
VHF/UHF
~
AC IN
COMPONENT
VIDEO OUT
P
B
Y
P
R
1
2
VIDEO S VIDEO
R-AUDIO-L
IN
OUT
COMPONENT
VIDEO IN
P
B
Y
P
R
DIGITAL OUT
SET TOP
BOX
CONTROL
G-LINK
COAXIAL
OPTICAL
PCM/DTS/
DOLBY DIGITAL
LINE OUT
1
3
VIDEO S VIDEO
R-AUDIO-L
LINE IN
HDMI OUT
B
A
DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/
DOLBY DIGITAL
1
2
VIDEO S VIDEO
R-AUDIO-L
LINE OUT
HDMI OUT
AV amplifier (receiver)
with a decoder
(red)
TV, projector, or AV
amplifier (receiver)
Audio/video cord
(supplied)
: Signal flow
Coaxial digital cord (not supplied)
to DIGITAL OUT (COAXIAL or OPTICAL)
to LINE OUT (R-AUDIO-L) 1 or 2
Optical digital cord (not supplied)
Rear (L)
DVD recorder
(white)
(yellow)
*
(yellow)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial or
optical/HDMI
digital input
Rear (R)
Front (R)
Subwoofer
Center
HDMI cord
(not supplied)
or
or
