46
4
Press ENTER.
The sub menu appears with the
description of the programme displayed
in the information box.
indicates that the programme is age
limited (page 78).
5
Select “Timer,” and press ENTER.
• In case of a current TV/radio broadcast
timer setting, your recorder will
immediately start recording.
• In case of a future programme timer
setting, an event bar and a new icon
appear in the EPG display indicating
that a timer event is associated with that
programme.
Your recorder will automatically begin
recording when the programme starts. To
modify the timer setting, see page 50.
Some examples of timer event icon
types are:
(red): Indicates that the whole
programme is set to be recorded.
(grey): Indicates that the programme
is set to be recorded, but only a part or
none of the programme can be recorded
(e.g. because of timer setting overlap).
(red): Indicates the programme is now
recording.
To scroll the EPG display by page (Page
mode)
Press PAGE
/
while the EPG display
is turned on to display the previous/next ten
channels.
To stop recording during timer recording
Press
x
REC STOP. Note that it may take a
few seconds for the recorder to stop
recording.
If the timer settings overlap
See page 44.
To extend the recording duration time
while recording (Guide Timer Extend)
See page 44.
To confirm, change, or cancel timer
recording
See “Checking/Changing/Cancelling Timer
Settings” (page 50).
z
Hint
The Rec Mode Adjust function also works with this
timer method (page 44).
b
Notes
• This recorder is featured with an EPG timer auto
extend functionality that allows EPG timer
recordings to be made in case of an early start
(before the scheduled start time) or late finish
(after the scheduled end time).
• The EPG programme start and end time are
determined by the broadcaster.
