Sony RDR-GX7 Скачать руководство пользователя страница 24

Страница: 24 / 112

Step 7: Easy Setup

Press ENTER.

The Setup Display for selecting the type of jack used
to connect to your amplifier (receiver) appears.

Press

to select the type of jack (if any)

you are using to connect to an amplifier
(receiver), then press ENTER.

Choose the item that matches the audio connection
you selected on pages 20 to 21 (

through

• If you connect just a TV and nothing else, select “No,”

then go to step 15.

• Select “Yes: LINE OUT (R-AUDIO-L),” then go to

step 15.

• Select “Yes: DIGITAL OUT.” The Setup Display for

“Dolby Digital” appears.

Press

to select the type of Dolby Digital

signal you wish to send to your amplifier
(receiver).

Choose the signal that matches the audio connection
you selected on pages 20 to 21 (

through

• D-PCM

• Dolby Digital (only if the amplifier (receiver) has a

Dolby Digital decoder)

Press ENTER.

The Setup Display for selecting the type of DTS
signal appears.

Press

to select whether or not you wish

to send a DTS signal to your amplifier
(receiver) and press ENTER.

Choose the item that matches the audio connection
you selected on pages 20 to 21 (

through

• Off

• On (only if the amplifier (receiver) has a DTS decoder)

Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup
operations are complete.

To return to the previous step

Press RETURN.

Hint

If you want to run Easy Setup again, select “Easy Setup” in the Setup
Display (page 100).

Notes

• If there are only a few channels in your area that carry time signals,

setting the clock automatically may take up to about 20 minutes after
the recorder turns off. If nothing happens even after you wait about 20
minutes, set the clock manually in “Clock” of “Settings” (page 93).

• If you use the antenna connection Hookup 2 (page 17), make sure you

leave the cable box on.

• To record TV programs using the timer, you must set the clock

accurately.

EASY SETUP

Audio Connection

5/5

Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.

Yes :

LINE OUT(R-AUDIO-L)

Yes :

DIGITAL OUT

B-1

C-1

B-2

C-2

EASY SETUP

Audio Connection

5/5

Dolby Digital

D-PCM

Dolby Digital

B-2

C-2

EASY SETUP

Audio Connection

5/5

DTS

Off

B-2

C-2

EASY SETUP

Easy Setup is finished

Finish

Содержание RDR-GX7

















































































































Результаты поиска

Содержание RDR-GX7

Отзывы:

Sony RDR-GX7, Руководство по эксплуатации, Страница: 24 / 112

Результаты поиска

Содержание RDR-GX7

Отзывы: