16
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns,
A
or
B
, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
A
Digital audio input jack
If your audio component has a Dolby
*1
Digital,
DTS
*2
, or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
B
Audio L/R (left/right) input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
z
Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
AUDIO
INPUT
L
R
B
A
HDMI OUT
COAXIAL
PCM/DTS/
MPEG/
DOLBY DIGITAL
DIGITAL OUT
Audio component with
a decoder
(white)
TV, projector, or
audio component
Audio cord (not
supplied)
: Signal flow
Coaxial digital
cord (not supplied)
to DIGITAL OUT (COAXIAL)
to AUDIO OUT (L/R)
Rear (L)
DVD recorder
(red)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial/HDMI digital input
Rear (R)
Front (R)
Subwoofer
Centre
HDMI cord
(not supplied)
to HDMI OUT
or
Содержание RDR-GX380
Страница 90: ......
Страница 91: ......
Страница 92: ...Sony Corporation Printed in Indonesia Printed using VOC Volatile Organic Compound free vegetable oil based ink ...