Sony PXW-Z150 XDCAM, Обновление прошивки

Страница: 22 / 100

8
GB
1
Select (NETWORK SET) t
[NETWORK CLIENT MODE]
t
[EXECUTE].
2
Select the connection method
(wired/wireless).
The camcorder connects to the CCM.
Streaming is enabled after connecting
to the CCM.
A
Wi-Fi or LAN
B
NETWORK CLIENT MODE
C
Streaming status indicator
For details, see
“Icon display”
(page 12) .
D
*CCM name (set on the CCM side)
E
*SSID of access point (when
wireless is selected)
* 4 and 5 are only displayed
immediately after connecting to the CCM.
b
Note
• For details about limitations when running
in network client mode, see “Function
limitations” (page 13) .
z Tips
• You can assign the network client mode
start/stop function (NETWORK CLIENT
MODE) to an ASSIGN button.
• The frame rate of the streaming data will
vary depending on the recording settings
for the original file. For details, see
“Network client mode supported formats”
(page 10)
.
• For details about supported operations on
the camcorder in network client mode, see
“Network client mode operations and
display” (page 12)
.
Streaming is started/stopped by the CCM.
For details, refer to the operating
instructions of the CCM.
1
Stop recording, if currently
recording.
(Network client mode cannot be
stopped while recording.)
2
Press one of the following.
• MENU button
• ASSIGN button assigned with the
network client mode start/stop
function
3
Select [YES] on the confirmation
screen.
Network client mode stops.
Starting network client mode
NETWORK CLIENT MODE
CCM : Sony CCM
SSID : XXX - XXXXXXXX
STRM
1 2 3
4
5
Starting/stopping streaming in
network client mode
Stopping network client mode