106
Notes
• When Streaming is set to On, the monitoring function
cannot be used.
• Audio/video data is transmitted as-is via the Internet.
Accordingly, the data may be disclosed to other
parties.
Always check that the transmission destination can
receive the streaming data.
The data may be sent to an unintended party if the
address or other settings are configured incorrectly.
• Not all frames may be played, depending on the status
of the network.
• The picture quality may deteriorate in scenes with
excessive motion.
• Not all frames may be played when the stream is set to
a large size with a small bit rate.
To reduce this, select a smaller size for the Size setting.
You can set the format of the proxy file that is
recorded on the SD card of the camcorder.
Video
• XAVC Proxy (AVC/H.264 Main Profile, 4:2:0
Long GOP)
• Size is selected in the following settings.
Audio
• AAC-LC compression
• Sampling frequency: 48 kHz
• Bit rate: 128 kbps for stereo
Notes
• The bit rate is an average value, so this value may be
exceeded at times.
• 24 fps is not supported.
Use the Station Settings tab of the Settings screen
to make settings for connecting the camcorder to
a wireless LAN.
Destination
Address
Enter the
address of the
transmission
destination
server for
streaming data.
Host name or IP
address
Destination
Port
Enter the port
number of the
transmission
destination
server used for
streaming.
1 to 65535
Proxy Format Settings
Item
Description
Setting
Item
Description
Setting
Proxy File
recording
Size
Sets the video
size and bit rate
for proxy files.
1280×720 (9Mbps)/
1280×720 (6Mbps)/
640×360 (3Mbps)/
480×270 (1Mbps)/
480×270 (0.5Mbps)
Proxy File
recording
Frame
Rate
Displays the
video frame
rate for proxy
files.
23.98fps/25fps/
29.97fps/50fps/
59.94fps
Proxy File
recording
Bit Rate
Displays the
video bit rate
for proxy files.
9Mbps (VBR)/
6Mbps (VBR)/
3Mbps (VBR)/
1Mbps (VBR)/
0.5Mbps (VBR)
Proxy File
recording
Audio
Channel
Select
Sets the audio
channel to
record to proxy
data.
Ch-1 & Ch-2/
Ch-3 & Ch-4
Wireless LAN Station Settings
Item
Description
Host Name
Name of the camcorder (can be
modified)
SSID
Displays the SSID selected in
[Access Point].
Key
Enter the password for the
access point.
