Sony PXW-X320, Руководство по эксплуатации

Страница: 126 / 223

126
Rec Function
Makes settings related to
special recording modes.
Note
When Picture Cache is
assigned to an assignable
switch, this item is disabled
(grayed out).
Interval Rec On/ Off Turns the Interval Rec function on/off.
(When this is set to “On,” “Slow &
Quick,” “Clip Continuous Rec,”
“Picture Cache Rec,” and “Frame Rec”
are set to “Off.”)
Frame Rec On/
Off
Turns the Frame Rec function on/off.
(When this is set to “On,” “Slow &
Quick,” “Clip Continuous Rec,”
“Picture Cache Rec,” and “Interval
Rec” are set to “Off.”)
Number of
Frames The available settings
vary depending on the
settings in “Format” >
“HD System Line and
Format” > “System
Frequency.” When “Interval Rec” or “Frame Rec” is
set to “On,” specifies the number of
frames to shoot in one Interval Rec or
Frame Rec take.
2frame /6frame/
12frame
When “HD System Line” is set to
“720,” and “System Frequency” is set to
“59.94P” or “50P.”
1frame
/3frame/
6frame/9frame
When “HD System Line” is set to other
than “720”, or “System Frequency” is
set to other than “59.94P” or “50P.”
Interval Time 1 /2/3/4/5/6/7/8/9/10/
15/20/30/40/50 (sec)
1/2/3/4/5/6/7/8/9/10/
15/20/30/40/50 (min)
1/2/3/4/6/12/24 (hour)
Set the interval for Interval Rec
shooting, when “Interval Rec” is set to
“On.”
Pre-Lighting
Off
/2sec/5sec/10sec If you want the video light to be turned
on before Interval Rec shooting, select a
number of seconds before the start of
shooting. If you do not want it to be
turned on, select Off.
Simul Rec Simul/ Off Sets whether to use the Simul Rec
function for recording simultaneously to
slot A and slot B.
Assignable SW
Assigns functions to
assignable switches.
For details about assigning
functions, see “Assigning
Functions to Assignable
Switches” (page 164).
<0> see page 164 Assigns function to ASSIGN. 0 switch.
<1> Assigns function to ASSIGN. 1 switch.
<2> Assigns function to ASSIGN. 2 switch.
<3> Assigns function to ASSIGN. 3 switch.
<4> Assigns function to ASSIGNABLE 4
switch.
<5> Assigns function to ASSIGNABLE 5
switch.
RET Assigns function to RET button on the
lens.
C. Temp Assigns function to COLOR TEMP.
button.
OPERATION
Item Sub-item Setting Description