Sony PXW-X200, Руководство по эксплуатации

Страница: 98 / 180

Men
u
Conf
ig
ur
at
ion an
d
De
ta
iled Se
tt
ing
s
Setup Menu List 98
Handle Zoom
Setting the zoom
operation
Off
/ Low / High / Vari Set the zoom operation by using the on-handle ZOOM button.
Off: Zoom does not work.
Low: Zoom works at the speed that is set for “Low” in “Zoom
Speed.”
High: Zoom works at the speed that is set for “High” in
“Zoom Speed.”
Vari: The deeper the on-handle ZOOM button is pressed, the
faster the zoom speed.
Zoom Speed
Setting the zoom
speed
High
1 to 99 (70)
Set the speed of zooming to be executed when you press the
handle ZOOM button with the zoom speed switch set to H.
Low
1 to 99
(30)
Set the speed of zooming to be executed when you press the
handle ZOOM button with the zoom speed switch set to L.
Note
Zooming may not operate smoothly if you select a low speed.
Remote
1 to 99
(50)
Set the speed of zooming to be executed when you press the
ZOOM button of the IR Remote Commander.
Note
If the infrared line from the Remote Commander is not
received properly, zooming may not operate smoothly.
Zoom
Transition
Setting the zoom
operation mode
Linear
/ Soft Set the operation mode at the beginning and end of zooming
with the on-handle ZOOM button.
Linear: Zooming immediately begins at the specified speed
when the ZOOM button is pressed and immediately ends
when the button is released.
Soft: Zooming gradually increases the speed up to the
specified speed after the ZOOM button is pressed and
gradually decreases the speed and ends after the button is
released. (1 second at maximum from when the button is
released till the operation ends.)
Interval Rec
Setting the Interval
Recording
function
Setting
On / Off
Turn the Interval Recording function on/off.
Interval Time
1
to 10/15/20/30/40/50 sec
1 to 10/15/20/30/40/50 min
1 to 4/6/12/24 hour
Set the interval of recording in Interval Recording.
Number of Frames
1 / 3 / 6 / 9 or
2 / 6 / 12 (When using 1080/
59.94P, 1080/50P, 720/59.94P,
or 720/50P)
Set the number of frames to be recorded at a time in Interval
Recording.
Pre-Lighting
On /
Off
Set whether to turn the video light before starting Interval
Recording while the video light is mounted on the Multi
Interface Shoe. If set to “On”, the video light turns on
automatically approximately 2 seconds before recording.
CAMERA SET
Menu items Subitems and setting values Contents