Sony PXW-X200, Руководство по эксплуатации, Страница: 37 / 180

Recording Audio Signals 37
Record
ing
2
Attach a microphone, then return the
external microphone holder cover to its
original position to secure it.
3
Connect the microphone cable to the
AUDIO IN CH-1/CH-2 connectors.
4
Set the corresponding AUDIO IN
switch (CH-1/CH-2)
(page 11) to EXT.
5
Set “CH1 EXT Input” and “CH2 EXT
Input” in “Audio Input” of the AUDIO
SET menu to “XLR”
(page 104) .
6
Set the corresponding input (LINE/
MIC/MIC+48V) switch (CH-1/CH-2)
(page 9) according to the connected
microphone.
MIC: For a microphone that requires no
power supply
MIC +48V: For a microphone that requires
+48V power supply (such as the ECM-
673)
Note
When using XLR input connector, set “CH1 EXT Input”
or “CH2 EXT Input” in “Audio Input” of the AUDIO
SET menu to “XLR”.
Using a microphone compatible with the Multi
Interface Shoe
1
Set the CH-1 and CH-2 AUDIO IN
switches to EXT.
2
Attach a microphone to the Multi
Interface Shoe
3
Set “CH1 EXT Input” and “CH2 EXT
Input” in “Audio Input” of the AUDIO
SET menu to “SHOE MIC”
(page 104) .
Notes
• When “NW&Proxy/USB” is set to “Network&Proxy,”
no power is supplied to the microphone. When a
wireless microphone UWP-D11/D12 is attached to the
camcorder, set “NW&Proxy/USB” to options other
than “Network&Proxy.”
• When “CH1 EXT Input” and “CH2 EXT Input” in
“Audio Input” of the AUDIO SET menu are set to
“SHOE MIC,” the settings for the CH-1 and CH-2
input (LINE/MIC/MIC+48V) switches are disabled.
Any position is set to equivalent to MIC.
To adjust the levels automatically (AGC)
When the AUDIO SELECT switches CH-1 and
CH-2
(page 11) are set to AUTO, the audio
recording levels are automatically adjusted.
To adjust the levels manually
Set the AUDIO SELECT switches CH-1 and CH-
2 to MANUAL and adjust the audio recording
levels by turning the AUDIO LEVEL knobs
(page 11) .
Set the controls to 5 for the reference setting (0
dB). Setting to 10 maximizes the level (+12 dB),
and setting to 0 minimizes it (–
∞
).
The input levels are displayed on the screen when
you press the DISPLAY button
(page 14) .
Audio recording in special recording
modes
No audio recording is made in Interval Recording
or Frame Recording.
No audio recording is made in Slow & Quick
recording if the recording frame rate is set to a
value different from the playback frame rate.
You can monitor the sounds being recorded with
the headphones connected to the headphone
connector (stereo mini jack)
(page 8) .
External
microphone
to AUDIO IN
Cable
clamp
Adjusting the Audio Recording
Levels
Monitoring the Audio