Sony PXW-FS7, Руководство по эксплуатации

Страница: 39 / 128

39
A lens that supports auto focus is required. Set the
FOCUS switch
(page 9) on the camcorder to the
“AUTO” position. If the lens is fitted with a focus
selector switch, set the switch to the “AF/MF” or
“AF” position. If the switch is set to the “Full
MF” or “MF” position, lens focusing cannot be
operated from the camcorder
(page 24) .
Temporarily stopping auto focus (Focus
Hold)
Press the PUSH AUTO FOCUS button (page 9)
when in auto focus mode to override auto focus.
This is useful, for example, when something
crosses in front of the subject that you do not want
to focus on, or when auto focus is lost.
To adjust the focus manually, set the FOCUS
switch
(page 9) to “MAN.”
This allows you to adjust the focus manually
according to the shooting conditions.
Manual focusing is useful for the following types
of subjects.
- Subjects on the far side of a window covered
in water droplets
- Subjects with low contrast against the
background
- Subjects further away than nearby subjects
Adjusting focus rapidly using manual
focus (Push Auto Focus)
Position the subject that you want to adjust focus
for in the center of the image, then press the
PUSH AUTO FOCUS button
(page 9) .
The focus returns to the previous setting when
you release the button.
This is useful when you want to quickly focus on
a subject before starting to shoot.
Notes
• The Push Auto Focus function does not operate if the
lens is set for manual focusing.
• During Push Auto Focus operation when using an LA-
EA2/4, Full Auto mode is On.
Focus indicator
Indicates the focus state.
• (Lit): Subject is in focus.
• (Flashing): Subject is out of focus. Since
focusing is not automatic, change the
composition and focus settings to achieve
focus.
Focusing using magnified view (Focus
Magnifier)
By factory default, the Focus Magnifier x4/x8
function is assigned to the ASSIGN4 button on
the grip remote control
(page 45) .
Press the ASSIGN4 button.
The focus magnifier screen appears with the
center magnified by approximately four times.
Press the button again to increase the
magnification to approximately eight times. This
function is useful for checking the focus.
Press the button again to return to the normal
screen.
Notes
• The recorded image or SDI/HDMI output image is not
magnified when the focus is magnified.
• During focus magnification, the STATUS CHECK
button and menu buttons have no effect.
Adjusting focus using the focus assist
indicator
The focus position is indicated by the maximum
reach of the bar. Adjust the focus to maximize the
length of the bar.
Adjusting the Focus Automatically
Adjusting the Focus Manually
Focus detection range frame
(Focus area marker)
Focus assist indicator