background image

100

The fan is a consumable part that will need 
periodic replacement.
When operating at room temperature, a normal 
replacement cycle will be about 5 years. 
However, this replacement cycle represents only 
a general guideline and does not imply that the 
life expectancy of this part is guaranteed. For 
details on parts replacement, contact your dealer.

If the unit is suddenly taken from a cold to a warm 
location, or if ambient temperature suddenly 
rises, moisture may form on the outer surface of 
the unit and/or inside of the unit. This is known as 
condensation. If condensation occurs, turn off the 
unit and wait until the condensation clears before 
operating the unit. Operating the unit while 
condensation is present may damage the unit.

The LCD panel fitted to this unit is manufactured 
with high precision technology, giving a 
functioning pixel ratio of at least 99.99%. Thus a 
very small proportion of pixels may be “stuck”, 
either always off (black), always on (red, green, 
or blue), or flashing. In addition, over a long 
period of use, because of the physical 
characteristics of the liquid crystal display, such 
“stuck” pixels may appear spontaneously. These 
problems are not a malfunction. Note that any 
such problems have no effect on recorded data.

The battery terminal of this unit (the connector for 
battery packs and AC adaptors) is a consumable 
part. 
Power may not be supplied to the unit properly if 
the pins of the battery terminal are bent or 
deformed by shock or vibrations, or if they 
become corroded due to prolonged outdoor use.
Periodic inspections are recommended to keep 
the unit working properly and to prolong its 
usable lifetime. Contact a Sony service or sales 
representative for more information about 
inspections.

About the built-in rechargeable battery

The camcorder has a built-in rechargeable battery 
for storing the date, time, and other settings even 
when the camcorder is turned off. The built-in 
rechargeable battery will become charged after 
24 hours have elapsed if the unit is connected to a 
power outlet using the AC adaptor or if a fully 
charged battery pack is attached, regardless of 
whether the camcorder is turned on/off. The 
rechargeable battery will be fully discharged in 
about 

3 months

 if the AC adaptor is not 

connected or the camcorder is used without the 
battery pack attached. Use your camcorder after 
charging the battery. However, even if the built-
in rechargeable battery is not charged, the 
camcorder operation will not be affected as long 
as you are not recording the time and date.

Appendix

Usage Precautions

Содержание PXW-FS7

































































































































Отзывы: