Sony PWS-4500, Руководство по эксплуатации

Страница: 30 / 63

30
Port Screen
C
h
ap
te
r 4
W
e
b
M
enu
Chunk File
When recording continuously, this sets the number of
hours before splitting the recording into separate files.
When split into separate files, each file is appended with an
incrementing suffix (_01, _02, and so on).
• 6H
• 24H
User Specified Name
Sets the 4-character prefix for the names of recorded files.
Enter an arbitrary string in the text box or select a prefix
from the drop-down list.
TC
Makes time code settings.
TCG Source
Selects the source signal for synchronizing the internal
time code generator.
• Internal-Preset
• External-LTC
• SDI-LTC or NMI-LTC
• SDI-VITC or NMI-VITC
• Master TC
REGENE Source
Selects the signal to regenerate when the time code
generator is in regenerate mode or in automatic editing
mode.
• TC&UB: Regenerates both the time code signal and user
bit signal.
• TC Only: Regenerates the time code signal only.
• UB Only: Regenerates the user bit signal only.
RUN Mode
Sets the running mode of the time code generator.
• Free Run: The time code advances when the power is on
regardless of the unit’s operating mode.
• Rec Run: The time code advances during recording only.
DF Mode
Sets the drop frame mode of the time code generator or
timer counter.
• NDF
• DF
This setting is valid only when [TCG Source] is set to
“Internal-Preset” and the frame frequency is 29.97 Hz.
When the frame frequency is not set to 29.97 Hz, the mode
is set to NDF, and DF cannot be selected.
TC OUT
Sets the output time code from the TIME CODE OUT
connector when recording.
• Through
• Regene
Timer Select
Selects the time data to display.
• TC
• UB
• TM1
• TM2
Timer Set
Displays the time counter.
To change the counter, enter a value and click the [Set]
button. Clicking the [Reset] button resets the counter.
Displayed only when [Timer Select] is set to TC, UB, or
TM1.
Character
Character On/Off
Selects whether to display superimposed character
information, such as the time code, on the monitor signal.
Character Size
Sets the display size of character information.
• Small
• Medium
Vertical Position
Sets the vertical display position of character information.
• 0 (top) to 22 to 255
Horizontal Position
Sets the horizontal display position of character
information.
• 0 (left) to 128 to 255
Character Info.
Sets the character information content if [Character On/
Off] is set to “On.”
• Timedata Only: Timer counter only
• Timedata & TM1: Timer counter and TM1
• Timedata & TM2: Timer counter and TM2
• Timedata & UB: Timer counter and user bits
• Timedata & Status: Timer counter and operating status
• Timedata & Audio: Timer counter and audio level
Background
Sets the character information background.
• Outline: White characters with black outlines
• Translucent: White characters on a gray transparent
background
• without BG: White characters with no background
• with BG: White characters on a black background
Sub Status
Sets additional information displayed with the character
information.
• Off: Displays no additional information.
• File Name: Displays the file name.
Note
Note