Sony PWS-100RX1, Руководство пользователя

Страница: 29 / 38

Help Guide
NETWORK RX STATION
PWS-100RX1 / PWS-110RX1 / PWS-110RX1A
Ver.1.11 or later
Starting Streaming
Use the following procedure to start and stop streaming from the Streaming screen of the Connection Control Manager.
Specify the transmitter device at the shooting location, and enable streaming transmission.
To stop streaming
Click [Stop] in the streaming control area.
To save video images during streaming to a file
You can save video images being streamed on the SDI1 and 2 ports to a file by setting [File Output (SDI 1,2 Only)] on
the [RX] tab of the Settings screen to on. The settings on the [RX] tab are used to start/stop saving and to set the save
destination.
Video images that are being saved to file are indicated by a
icon on the thumbnails in the receiver area. If an error
occurs while saving to a file, a icon appears. Check the status of the save destination for errors.
Note
The [Delay] and [Network Range] parameters in the Settings area can be changed while streaming, although the streaming
output may freeze or be disturbed momentarily when the value is changed.
The settings on the [RX] tab cannot be modified during streaming.
When saving video to a file while streaming, the image is re-encoded at 720p and the file is subdivided about every two hours.
The correct operation of the saved file is not guaranteed for all playback environments.
Images streamed to the SDI3 and 4 ports are not saved.
Related Topic
Structure of the Streaming Screen
Restrictions
Select a transmitter device displayed by a thumbnail in the Source area.
1
Select the SDI port group to output in [Output to] in the Settings area.
2
Select the maximum bit rate for streaming in [Network Range] in the Settings area.
3
Select the delay time for streaming video in [Delay] in the Settings area.
4
Click [Set] to save the settings in the Settings area.
5
Click [Start] in the streaming control area.
Distribution of streaming video starts.
6
29