Menu List
120
Ch
apt
er 6 Men
u
and
Det
a
iled Set
tings
Marker
Makes settings related
to marker display in the
viewfinder screen.
Setting
On
/Off
Turns all markers on or off.
Note
When Marker is assigned to the
ASSIGN. 2 switch, this setting is
disabled.
Center Marker
1/2/3/4/
Off
When the center marker is
displayed, selects the type. Select
“Off” if you do not want to display
the marker.
Note
When “Safety Zone,” “User Box,”
and “Guide Frame” are set to “On,”
this setting cannot be turned on.
Center H Position
–40 to
0
to 40
Specifies the horizontal position of
the center marker.
Center V Position
–40 to
0
to 40
Specifies the vertical position of the
center marker.
Safety Zone
On/
Off
Turns the safety zone display on or
off.
Note
When “Center Marker,” “User Box,”
and “Guide Frame” are set to “On,”
this setting cannot be turned on.
Safety Area
80%/
90%
/92.5%/95%
Selects the safety zone range.
Aspect Marker
Line/Mask/
Off
When an aspect marker is to be
displayed, selects the display
method. Select “Off” if you do not
want to display the marker.
Line:
Show as white lines.
Mask:
Display by lowering the
video signal level of areas
outside the marker range.
Aspect Select
15:9/14:9/13:9/
4:3
/
1.66:1/1.85:1/2.35:1/
2.4:1
Selects the aspect ratio of the
marker.
Aspect Mask
0% to
30%
to 90% (10%
step)
When “Aspect Marker” is set to
“Mask,” specifies the video signal
level of areas outside the marker
range as a percentage value relative
to the video signal level of areas
inside the marker range.
User Box
On/
Off
Turns the box cursor display on or
off.
Note
When “Center Marker,” “Safety
Zone,” and “Guide Frame” are set to
“On,” this setting cannot be turned
on.
OPERATION
Menu items
Sub-item
Settings
Description
Содержание PMW400K
Страница 212: ......