Viewfinder Screen Display
36
Chapt
er
1
Ov
er
v
ie
w
e
Video level indication
An indication is displayed together with an
appropriate ND filter position number when the
light level of the subject is too high or too low.
f
Timecode
Caution message
Indicates the elapsed recording/playback time,
timecode, user bits data or other information
selected by the DISPLAY switch
Also indicates a caution message when caution is
required such as when you try to change settings.
g
Brightness level
Indicates the average brightness level (%) of the
detection area.
h
Subject distance range (3D) or
recording status (2D)
In 3D record mode, displays the distance range to
the subject that produces natural stereoscopic
images in units of meters or feet.
In 2D record mode or in 3D mode when recording
to either left slots or right slots only, displays the
recording status.
Single Rec L:
Recording in 3D mode to left slots
only
Single Rec R:
Recording in 3D mode to right
slots only
2D Rec L:
Recording in 2D mode to left slots
only
2D Rec R:
Recording in 2D mode to right slots
only
2D Rec L&R:
Recording in 2D mode to both left
and right slots
2D L:
Can record in 2D mode to left slots only
2D R:
Can record in 2D mode to right slots only
2D L&R:
Can record in 2D mode to both left and
right slots
2D--:
Cannot record
i
Convergence distance
Displays the distance from the lens surface to the
convergence point in units of meters or feet.
j
Electric color temperature filter
Appears when the CC 5600K function is set to on.
k
Filter position
Indicates the currently selected ND filter position
number.
When ELECTRICAL CC is assigned to an
assignable switch, the electrical filter position (A/
B/C/D) appears to the right of the ND filter
position (1 to 4), as shown on the previous page.
l
White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
ATW:
ATW (Auto Tracing White Balance) mode
W:A:
Memory A mode
W:B:
Memory B mode
W:P:
Preset mode
3200:
When the assignable switch to which Color
Temp SW 3200K has been assigned is on
4300:
When the assignable switch to which Color
Temp SW 4300K has been assigned is on
5600:
When the assignable switch to which Color
Temp SW 5600K has been assigned is on
6300:
When the assignable switch to which Color
Temp SW 6300K has been assigned is on
m
Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
n
Shutter
Indicates the shutter speed or the shutter mode.
For details, see “Setting the Electronic Shutter”
(page 57).
o
Audio level meters
Indicate the audio levels of channel 1 and channel
2.
p
Remaining media capacity
Indicates the recording time remaining for each of
the media loaded in the slots (A or B). The
available time for recording with the current
video format (recording bit rate) is calculated
according to the remaining space of each media
and indicated in time units of minutes. A lock
icon appears if the media is write-protected.
When media is inserted in both the left and right
slots, and the camcorder is recording or can
record to both, this indicates the media (left or
right) with the lower remaining recording time.
When the camcorder is recording or can record to
left slots or right slots only, this indicates the
remaining recording time for that media.
Содержание PMW-TD300
Страница 185: ......
