Freeze Mix: Image Alignment
76
Record
ing
Note
Slow & Quick Motion mode is automatically
canceled when you set the power switch to OFF,
while the “On Format” and “Frame Rate” settings
are maintained.
Using the Freeze Mix function, an image (still
picture) of a clip recorded in HD Mode can be
temporarily superimposed on the current camera
picture, permitting you to easily align images for
next recording.
To use the Freeze Mix function
Assign the Freeze Mix function to one of the
assignable buttons.
For details, see “Changing Functions of the
Assignable Buttons” on page 69.
Superimposing a Freeze Mix image
1
Stop recording to set the camcorder to
STBY (recording standby) status.
2
Press the REC REVIEW button to
review the recorded images, or press the
ASSIGN button to which you assigned
“Freeze Mix.”
3
Press the ASSIGN button to which you
assigned “Freeze Mix” at the image
with which you want align.
The image where you pressed the ASSIGN button
in step
3
is displayed as a still picture over the
current camera picture.
Canceling Freeze Mix status
You can cancel it with the ASSIGN button to
which you assigned “Freeze Mix” or the REC
START/STOP button.
• When you cancel Freeze Mix status by pressing
the ASSIGN button, the normal camera picture
is restored.
• When you cancel Freeze Mix status by pressing
the REC START/STOP button, normal
recording begins.
Notes
• The Freeze Mix function cannot be used in SD
Mode.
Freeze Mix: Image
Alignment