Sony PMW-500, Руководство по эксплуатации

Страница: 33 / 203

Locations and Functions of Parts and Controls
33
Chapt
er
1
Ov
er
vie
w
Bottom of viewfinder screen
a
TLCS iris control mode
The following icons are displayed to indicate the
video level control modes based on the Total
Level Control System (TLCS).
b
Focus adjustment mode (when the auto
focus lens is mounted)
Indicates the current focus adjustment mode of
the camcorder.
• AF (Auto Focus mode)
• MF (Manual Focus mode)
• MF* (Manual Focus mode when the MF Assist
function is on)
• Full MF (Full Manual Focus mode)
c
External device control
“REC2” is displayed when MAINTENANCE
>Camera Config >HD-SDI Remote I/F is set to
[Chara] in the setup menu and a recording control
signal is output from the HD/SD SDI OUT
connector.
d
Operation status of connected i.LINK
device
The operating format (HDV or DV) and operation
status of that device are indicated as follows.
e
Video level indication
An indication is displayed together with an
appropriate ND filter position number when the
light level of the subject is too high or too low.
f
Timecode
Caution message
Indicates the elapsed recording/playback time,
timecode, user bits data or other information
selected by the DISPLAY switch
(see page 22)
.
Also indicates a caution message when caution is
required such as when you try to change settings.
g
Brightness level (when the CBK-VF01
is used)
Indicates the average brightness level (%) of the
detection area.
h
External input source
Indicates the type of external input signal (HDV)
to be recorded.
i
Recording of external input
Indicates “EXT” when an external input is
recorded.
j
Electric color temperature filter
Appears when the CC 5600K function is set to on.
k
Filter position
Indicates the currently selected ND filter position
number.
(see page 17)
.
When ELECTRICAL CC is assigned to an
assignable switch, the electrical filter position (A/
B/C/D) appears to the right of the ND filter
position (1 to 4), as shown on the previous page.
l
White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
ATW:
ATW (Auto Tracing White Balance) mode
W:A:
Memory A mode
W:B:
Memory B mode
W:P:
Preset mode
3200:
When the assignable switch to which Color
Temp SW 3200K has been assigned is on
4300:
When the assignable switch to which Color
Temp SW 4300K has been assigned is on
Icon TLCS control mode
Backlight mode
Standard mode
Spotlight mode
Indication Meaning
z
REC HDV recording in progress
STBY Standby for HDV recording
SSTD
z
REC DV recording in progress
STBY Standby for DV recording
Indication Meaning