Sony PMW-300, Руководство по обслуживанию

Страница: 68 / 134

2-11-5. HN-411 Board
Preparation
1. Remove the bottom panel assembly. (Refer to “2-5. Bottom Panel Assembly” )
2. Remove the inside panel assembly. (Refer to “2-6-1. Inside Panel Assembly” )
3. Remove the outside panel assembly. (Refer to “2-7-1. Outside Panel Assembly” )
4. Remove the rear panel assembly. (Refer to “2-8. Rear Panel Assembly” )
5. Remove the handle assembly. (Refer to “2-11-1. Handle Assembly” )
6. Remove the handle U-case assembly. (Refer to “2-11-2. Handle U-case Assembly” )
Procedure
1. Remove the four screws to detach the rear shoe.
2. Disconnect the two flexible flat cables from the two connectors (CN100, CN102) on the HN-411 board.
3. Remove the two screws to detach the HN-411 board.
Flexible flat cable
Flexible flat cable
CN102
HN-411 board
Rear shoe
CN100
P2 x 4
P2 x 4
P2 x 4
4. Install the removed parts by reversing the steps of removal.
PMW-300
2-40