Sony PMW-300, Руководство по обслуживанию

Страница: 64 / 134

2-11-3. KSW-65 Board
Preparation
1. Remove the bottom panel assembly. (Refer to “2-5. Bottom Panel Assembly” )
2. Remove the inside panel assembly. (Refer to “2-6-1. Inside Panel Assembly” )
3. Remove the outside panel assembly. (Refer to “2-7-1. Outside Panel Assembly” )
4. Remove the rear panel assembly. (Refer to “2-8. Rear Panel Assembly” )
5. Remove the handle assembly. (Refer to “2-11-1. Handle Assembly” )
6. Remove the handle U-case assembly. (Refer to “2-11-2. Handle U-case Assembly” )
Procedure
1. Disconnect the flexible flat cable from the connector (CN101) on the KSW-65 board.
2. Remove the five screws and lift up the KSW-65 board.
3. Disconnect the HN-413 board from the connector (CN400) on the KSW-65 board.
4. Disconnect the flexible flat cable from the connector (CN100) on the KSW-65 board.
5. Remove the JS knob from the KSW-65 board.
KSW-65 board
CN400
P2 x 4
JS knob CN101
P2 x 4
CN100
Flexible flat cables
HN-413 board
6. Install the removed parts by reversing the steps of removal.
PMW-300
2-36