20
Status Indications
St
at
us
Indi
c
a
tio
n
s
Status Indications
The unit’s indicators light and go off to indicate the operating status of the unit.
Status indication
Status of this unit, and what to do about errors
and warnings
ACCESS POWER
BATTERY
Off
Lit
Off
The unit is powered on.
Lit
Lit
Off
Accessing HDD.
Off
Flash (0.5
second
interval)
Off
Performing startup processing.
Off
Flash
(1 second
interval)
Off
Performing shutdown processing.
Lit during
access
Lit
Flash
(1 second
interval)
Remaining battery capacity has become low
(about 12% or less). Turn the power off and
exchange the battery pack for a fully charged one,
or connect the battery charger to the DC IN
connector.
Lit during
access
Lit
Flash
(0.5 second
interval)
There is almost no remaining battery capacity
(10% or less). Operation cannot continue. If you
continue to use the unit in this state, the unit will
power itself off automatically. Turn the power off
and exchange the battery pack for a fully charged
one, or connect the battery charger to the DC IN
connector.
Off
Lit
Flash (0.25
second
interval)
An abnormality has been detected in the battery
pack. Turn the power off immediately. Contact your
Sony representative.
Off
Flash (0.5
second
interval)
Flash (0.5
second
interval)
A hardware error has occurred. Turn the power off
and then on again. If the problem persists, contact
your Sony representative.
Lit during
access
Flash
(1 second
interval)
Flash
(1 second
interval)
The ambient temperature is outside the
guaranteed operation temperature range. Turn the
power off immediately. Use the unit only within the
guaranteed operation temperature range. For
more information on the guaranteed operation
temperature range, see “Specifications” (page 21).
Lit during
access
Lit
Flash (three
times,
1 second
interval
t
3
seconds off)
A decline in HDD functioning has been detected
through self-diagnostics. Continuing to use the unit
may result in loss of video data. Back up your data
as soon as possible, and contact your Sony
representative.
