93
Setup Menu
Chap
te
r 7
Men
u
s
142
REPEAT MODE
Set whether to set repeat playback mode.
off:
Do not set repeat playback mode.
play & VAR fwd [P&VAR]:
Perform repeat playback during normal
playback and 0 to +1 times normal speed variable playback in the
forward direction. To select repeat playback in this mode from a
device connected to the REMOTE (9P) connector, send the
“REPEAT PLAY” command or the “REPEAT VAR FWD” command.
force:
Perform repeat playback during normal playback and 0 to +1 times
normal speed variable playback in the forward direction. To select
repeat playback in this mode from a device connected to the
REMOTE (9P) connector, send the “PLAY” command or the “VAR
FWD” command.
When “play & VAR fwd” or “force” is selected, the icon indicating repeat
playback mode appears on the basic operation screen. When “on” is
selected also in setup menu item 154, the icon indicating both single clip
playback mode and repeat playback mode appears on the basic
operation screen.
143
INDEX PICTURE POSITION
Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec:
Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
145
MODE KEY ENABLE DURING
RECORDING
Set the mode buttons enabled during recording.
all enable [ena]:
All buttons are enabled.
stop:
Only the STOP button is enabled.
150
REC MODE
Select the recording mode.
normal [norml]:
Normal recording mode
disc exchange cache [D.EXC]:
Disc Exchange Cache mode
151
GUI OPERATION
Set whether to disable switching to the clip list screens.
enable [ena]:
Enabled
via stop [stop]:
Disabled (executable from stop mode only)
153
FIND MODE
Specify the frame to cue up when the PREV or NEXT button is pressed.
clip:
The first frame of the clip
clip & rec start mark [R.ST]:
The frame where a Rec Start essence
mark is set (if no essence mark is set, the first frame of the clip)
154
SINGLE CLIP PLAY MODE
Put the unit into single clip playback mode, or exit from single clip
playback mode.
off:
Exits from single clip playback mode. (Puts the unit into continuous
playback mode.)
on:
Puts the unit into single clip playback mode.
When “on” is selected, the icon indicating single clip playback mode
appears on the basic operation screen. When “play & VAR fwd” or “force”
is selected also in setup menu item 142, the icon indicating both single
clip playback mode and repeat playback mode appears on the basic
operation screen.
161
HDMI OUT SELECT
Specify which signal to output from the HDMI OUT connector: the same
signal as the SDI connector output, or the same signal as the SDI
connector output and thumbnails view signal by automatically switching
between them.
auto:
Output the same signal as the SDI connector output and
thumbnails view signal by automatically switching between them.
SDI [sdi]:
Output the same signal as the SDI connector output.
Menu items in the 100s, relating to the control panels
Item number Item name
Settings
